Sony NW-E75 - Manual (Page 20)

20
2
Press the Nx button to start
playback.
3
Press the REPEAT/SOUND button
to place the setting point during
playback.
The Network Walkman detects spoken
sections and non-spoken sections from
the set point, and Sentence Repeat starts.
(The spoken section is repeated once (during
detection), and the setting is counted.)
1 : 0 2 0 1 0
Notes
• You cannot use Sentence Repeat in the Group
mode, or when the current time is displayed.
• A spoken or non-spoken section of less
than 1 second will not be detected.
• If a non-spoken section is not detected until
the track end, the track end point is recognized
as a non-spoken section and Sentence Repeat
begins from the previous spoken section.
To clear the setting point
• Press the REPEAT/SOUND button during
Sentence Repeat playback.
• Press the MENU button during Sentence
Repeat playback.
• Select the Group mode by pressing the GROUP
button during Sentence Repeat playback.
• Select the previous or next track by rotating
the Shuttle switch during Sentence Repeat
playback.
(The Sentence Repeat mode is not canceled.)
To cancel the Sentence Repeat mode
Change the Repeat mode in the menu screen
(page 17).
Gro u p M
o d e
o
d
e
Shuttle switch
Press
(Confirm)
Nx button
MENU button
to (+/ > )
to ( . /–)
Setting the repeat
counts
You can set the repeat counts (1-9) of one
sentence for the Sentence Repeat mode.
1
Press the MENU button.
The menu screen is displayed.
R E P E A T M O D E >
2
Rotate the Shuttle switch to select
“REPEAT MODE >” and press the
Nx button to confirm.
3
Rotate the Shuttle switch to select
“SENTENCE Rep” and press the
Nx button to confirm.
“COUNT:” is displayed on the screen.
C O U N T : 2
4
Rotate the Shuttle switch to select
a desired repeat counts and press
the
Nx button to confirm.
5
Press the MENU button.
The display returns to the normal screen.
To cancel the Menu mode
Select [RETURN] in the menu screen or press the
MENU button.
Repeat mode