Sony MEX-5DI - Manual (Page 37)

37
01US02CD-U.fm masterpage:Right
MEX-5DI
3-242-048-11 (1)
Displaying an image as a
slide show
— Slide Show (Slide show mode)
Scroll static images in a “Memory Stick” as a
slide show. (This data will not be stored.)
1
Insert a “Memory Stick” (page 12).
2
Press (GRAPHIC) .
3
Press < or , repeatedly to select
“Slide Show.”
Each time you press < or ,, the item
changes as follows:
Wall Paper y Panorama y Jacket
Pic y ClipMotion y Slide Show y
Picture Del y Char Setup
4
Press (ENTER) .
5
Press M or m repeatedly to select a
folder for images that you want to set.
FolderSelect:
Selects the folder that
contains the image you want to set.
Cyber-shot: If you want to set a picture
taken by an optional Sony digital still camera
Cyber-shot, select this.
OFF: Turns Slide show mode OFF.
6
Press (ENTER) .
Select “FolderSelect” in step 5. If there are
images in folders of a lower layer, repeat step
5 and 6 to select the folder which contains
your desired image.
An image can be set in up to the 5th layer
folder in a “Memory Stick.”
7
Press (GRAPHIC) .
The display enters the Slide show mode, then
slide show starts.
Notes
• You can set the image format as follows:
JPEG: 1,600 × 1,200 dots or less
BMP, GIF, PNG: 640 × 480 dots or less
• You can set the display while playing back or
receiving a source only.
• You can select up to 100 images for each folder.
• The following folders in a “Memory Stick” cannot be
displayed.
– CONTROL
– DCIM
– MSSONY
– VOICE
– HIFI
• In step 6, if there is no image data, “No Picture” is
shown in the display.
• If you take out a “Memory Stick” after setting is
complete, display turns to the Clock mode.
Deleting the picture data
— Picture Del
The unit cannot store an image(s) whose capacity
is more than 2 MB.
1
Press (GRAPHIC) .
2
Press < or , repeatedly to select
“Picture Del.”
Each time you press < or ,, the item
changes as follows:
Wall Paper y Panorama y Jacket
Pic y ClipMotion y Slide Show y
Picture Del y Char Setup
3
Press (ENTER) .
4
Press M or m repeatedly to select the
mode in which an image you want to
delete is located.
If you delete all the stored image data, select
“ALL” and skip to step 7.
5
Press (ENTER) .
6
Press < or , repeatedly to select an
image you want to delete and press m .
The recycle bin appears at the lower side of
the selected image by pressing
m.
To stop deleting the selected image, press
< or , repeatedly to select your desired
image, then press
M.
To delete more than one image, repeat the
procedure in step 6.
7
Press (ENTER) .
8
Press M or m to select “YES.”
To cancel, select “NO.”
continue to next page t