Sony MZ-B10 - Manual (Page 8)

8
Checking the supplied accessories
When using the optional AC power adaptor
Before using the AC power adaptor, do the following procedure to attach the clamp filter to
the cord of the AC power adaptor. (You must affix the ferrite cores to comply with
applicable EMC standards.)
1 Open the clamp filter. 2 Wind the AC power cord into the clamp
filter as shown below.
3 Close the clamp filter.
Headphones/earphones (1) Carrying pouch (1)
Handstrap (1) Clamp filter for the AC power adaptor (1)
Attach the clamp filter when using the optional
AC power adaptor.
LR6 (size AA) alkaline dry
batteries (2) (World model only)
Headphones/earphones (1)
Maximum
length:
approx. 4 cm
(1
5 /
8
inches)
Make sure the
clasps are
fully engaged.