beautypg.com

Messages, Precautions – Sony RDH-GTK37iP User Manual

Page 29

background image

29

GB

Addi

tio
nal
In
fo

rm

at

ion

• Turn down the volume of the connected

Bluetooth device.

Tuner

Severe hum or noise, or stations
cannot be received. (“TUNED” or
“ST” flashes in the display panel.)

• Connect the antenna properly.
• Change antenna location and its

orientation to obtain good reception.

• Connect a commercially available

external antenna.

• Consult your nearest Sony dealer if the

supplied AM antenna has come off from
the plastic stand.

• Turn off surrounding electrical

equipment.

To reset the system

If the system still does not operate
properly, reset the system to factory
default settings.
Use the buttons on the unit to perform this
operation.

1

Unplug and plug the power cord
back in.

2

Press "/1 to turn on the system.

3

While holding down FUNCTION,
press "/1 for about 3 seconds.
“RESET” appears in the display panel.
All user-configured settings, such as
preset radio stations, timer, and the
clock are reset to factory default
setting.

Messages

CHARGING: The iPod/iPhone is being
charged when the system is off (standby
mode).

CHILD LOCK: The child lock function
has been enabled.

CONNECT: The iPod/iPhone is
connected during iPod function or the
system is connecting to the last connected
device during Bluetooth function.

ERROR: The USB device could not be
recognized or an unknown device is
connected.

NoDEVICE: No USB device is
connected.

NO TRACK: No playable file is loaded
in the system.

NOT SUPPORT: An unsupported USB
device is connected, the USB device is
connected through a USB hub, or the
iPod/iPhone whose battery is empty is
connected.

PAIRING: The system is in pairing
mode.

PUSH STOP: You tried to perform an
operation that can be performed only
when the playback is stopped.

READING: The system is reading
information of the USB device. Some
buttons are not available.

TIME NG: The start and stop times for
Play Timer are the same.

Precautions

On safety

• Completely disconnect the power cord (mains

lead) from the wall outlet (mains) if it is not
going to be used for an extended period of
time. When unplugging the unit, always grip
the plug. Never pull the cord itself.

• Should any solid object or liquid get into the

system, unplug the system, and have it
checked by qualified personnel before
operating it again.

• (For customers in United States only)

One blade of the plug is wider than other for
the purpose of safety and will fit to the wall
outlet only one way. If you are unable to insert
the plug fully into the outlet, contact your
dealer.