Video input, Usb-camera, Usb-ply/edt – Sony DCR-IP1 User Manual

Page 68: Data code remaining

Using the Menu

VIDEO INPUT

When you connect your camcorder to the other device using the supplied A/V
connecting cable, select the plug to be used for video input.

USB-CAMERA

You can connect a USB cable (supplied) to your camcorder, and view the picture
displayed on the screen of your camcorder on your computer (USB Streaming
function). For details, refer to the “Computer Applications Guide.”

USB-PLY/EDT

You can connect a USB cable (supplied) to your camcorder, and view the picture
on the tape or “Memory Stick Duo” in your camcorder on your computer. For
details, refer to the “Computer Applications Guide.”

DATA CODE

REMAINING

VIDEO

Select to input a video signal.

S VIDEO

Select to input an S video signals.

OFF

Select to deactivate the USB Streaming function.

USB STREAM

Select to activate the USB Streaming function.

STD-USB

Select to view the picture on the “Memory Stick Duo”.

USB STREAM

Select to view the picture on the tape.

OFF

Select when you do not want to display date, time and the camera
settings data during playback.

DATE/TIME

Select to display date and time during playback (p. 43).

CAMERA DATA

Select to display the camera settings data during playback.

AUTO

Select to display the remaining tape indicator for about 8 seconds:

– After the POWER switch is set to the PLAY/EDIT or

CAMERA-TAPE mode with the cassette inserted, and
your camcorder calculates the remaining amount of tape.

– When you touch

(play/pause).

Select to always display the remaining tape indicator.