beautypg.com

Set your pc – Sony DCM-M1 User Manual

Page 5

background image

When you connect the MD DISCAM to your PC, you
need to make Windows settings.

1. Open "Network" from the Control Panel.

2. The configuration window of "Network" appears.
Select the built-in LAN board (the added board or card
in the case of additional installation)and open
"Properties".

3. The configuration window of "TCP/IP
Properties" appears. Check "Specify an IP
address" and set the following.

IP Address:192.168.0.1
Subnet Mask:255.255.255.0

Now you have set your PC. Let's move on to the MD DISCAM.

Back to MD DISCAM Top page

See also other documents in the category Sony Camcorders: