Sony DCM-M1 - Manual (Page 25)

When your have completed settings of your PC, make
settings of your MD DISCAM.
1. Select "ADVANCED" - "PC CONNECT" - "SET UP"
from INDEX MENU of the MD DISCAM.
2. Select " Manual". Touching white up-and-down arrows
with the input pen or using Control Dial, make settings as
follows.
IP Address : 192.168.0.10
Net Mask : 255.255.255.0
Gateway : 0.0.0.0
3. Press "EXEC" and restart the MD DISCAM.
4. When the MD DISCAM restarts, select "ADVANCED" -
"PC CONNECT" - "CONNECT" from the menu.
5. In a little while, the display changes to the window as
shown on the left.(When it is accessed from the PC, the icon
on the window starts rotating.)
Now, the settings of the MD DISCAM are over. Let's try to
access your MD DISCAM from your PC.
Back to MD DISCAM Top page