Sony DCR-VX2100 - Manual (Page 86)

86
Erasing the last program
To change the end of the last program, delete the CUT-OUT mark.
To erase the whole program, delete both the CUT-IN and CUT-OUT marks.
(1) Turn the SEL/PUSH EXEC dial to select UNDO, then press the dial. The last set
program mark flashes.
(2) Turn the SEL/PUSH EXEC dial to select EXECUTE, then press the dial and the
setting is canceled.
To cancel erasing
Select RETURN in step 2, then press the SEL/PUSH EXEC dial.
Erasing all programs
(1) Select VIDEO EDIT in the menu settings. Turn the SEL/PUSH EXEC dial to select
ERASE ALL, then press the dial. All the program marks flash.
(2) Turn the SEL/PUSH EXEC dial to select EXECUTE, then press the dial and the
settings are canceled.
To cancel erasing all programs
Select RETURN in step 2, then press the SEL/PUSH EXEC dial.
To cancel a program you have set
Press MENU.
The program is stored in memory until the tape is ejected.
Dubbing only desired scenes – Digital program editing