Sony DCR-VX2100 - Manual (Page 84)

84
Dubbing only desired scenes – Digital program editing
If the VCR does not operate correctly
Make sure the IR SETUP code is correct; reset if necessary.
When the operations of the VCR do not work with an i.LINK cable
Keep the i.LINK connection, and carry out Preparation 2 (p. 77) again. The audio and
video signals are sent as digital signals.
Operation 1: Making Programs
(1) Insert the tape for playback into your camcorder, and insert a tape for recording into
the VCR.
(2) Press MENU to display the menu.
(3) Turn the SEL/PUSH EXEC dial to select
, then press the dial.
(4) Turn the SEL/PUSH EXEC dial to select VIDEO EDIT, then press the dial.
(5) Search for the beginning of the first scene you want to insert using the video control
buttons, then pause playback (p. 30).
3,4
5
STOP PLAY REW FF PAUSE
BEEP
COMMANDER
D I SPLAY
V I DEO ED I T
ED I T SET
RETURN
[MENU] : END
MELODY
OTHERS
MARK
UNDO
ERASE AL L
START
0:32:30:14
1 I N
TOTAL
SCENE 0:00:00:00
0
V I DEO ED I T
[MENU] : END
2
MENU