Asus P5B-VM DO - Manual (Page 80)

2-26 Chapter 2: BIOS setup
vPro Technology Configuration
With the support of the Intel ® vPro ™ Technology, the items in this menu allow you
to configure the Intel ® Management Engine (ME) subsystem and enable the Intel Intel ®
Active Management Technology. Select an item then press to display the Management Technology. Select an item then press to display the
configuration options.
To enable the following functions, you must install the Intel install the Intel ® Management
Engine Interface. See page 3-3 for details.
vPro Technology Configuration
ASF Support [Disabled]
ME HECI Configuration
ME-HECI [Disabled]
Configure Intel AMT Parameters
Intel AMT Support [Disabled]
Options
Disabled
Enabled
When the Intel AMT Support item is set to [Enabled], the vPro Technology
Configuration menu will change into the following one.
ASF Support [Disabled]
Allows you to enable or disable the Alert Standard Format (ASF).
Configuration options: [Disabled] [Enabled]
ME HECI Configuration
ME-HECI [Enabled]
When set to [Enabled], Host Embedded Communication Interface (HECI)
provides an interface for the exchange of message between the host
software and the ME firmware. Configuration options: [Disabled] [Enabled]
ME-IDER [Disabled]
Allows you to enable or disable the IDE Redirection interface by which
the remote management console is able to direct the client PC to boot.
Configuration options: [Disabled] [Enabled]
vPro Technology Configuration
ASF Support [Disabled]
ME HECI Configuration
ME-HECI [Enabled]
ME-IDER [Disabled]
ME-KT [Disabled]
Configure Intel AMT Parameters
Intel AMT Support [Enabled]
Force SOL [Disabled]
Options
Disabled
Enabled