Initiate graphic adapter [peg/pci, Internal graphic mode select [enabled, 8mb, Video function configuration – Asus P5B-VM DO User Manual
Page 79
ASUS P5B-VM DO
2-25
DRAM RAS# to CAS# Delay [6 DRAM Clocks]
Controls the latency between the DDR SDRAM active command and the
read/write command.
Configuration options: [3 DRAM Clocks]~[6 DRAM Clocks]
DRAM RAS# Precharge [6DRAM Clocks]
Controls the idle clocks after issuing a precharge command to the DDR
SDRAM. Configuration options: [3 DRAM Clocks]~[6 DRAM Clocks]
DRAM RAS# Activate to Precharge Delay [15 DRAM Clocks]
Configuration options: [9 DRAM Clocks]~[15 DRAM Clocks]
Memory Hole [Disabled]
Configuration options: [Disabled] [15MB-16MB]
Initiate Graphic Adapter [PEG/PCI]
Allows you to select the graphics controller as the primary boot device.
Configuration options: [IGD] [PCI/IGD] [PCI/PEG] [PEG/IGD] [PEG/PCI]
Internal Graphic Mode Select [Enabled, 8MB]
Allows you to select the amount of system memory used by the Internal graphics
device. Configuration options: [Disabled] [Enabled,1MB] [Enabled, 8MB]
Video Function Configuration
Video Function Configuration
DVMT Mode Select
[DVMT Mode]
DVMT/FIXED Memory
[128MB]
Options
Fixed Mode
DVMT Mode
DVMT Mode Select [DVMT Mode]
Configuration options: [Fixed Mode] [DVMT Mode]
DVMT/FIXED Memory [128MB]
Configuration options: [128MB] [256MB] [Maximum DVMT]