Sony DCR-VX1000 - Manual (Page 22)

22
Items in VTR Mode only
A MIX BAL
• Select this item and change the level of the indicator by pressing > or . to adjust the volume balance
between audio mode ST1 and ST2.
SEARCH
• Normally select C MEMORY to activate cassette memory search function.
• Select OFF otherwise. In this case, the recorded picture is searched without cassette memory
function.
When DIGITAL MODE is set to OVERLAP
You cannot set D ZOOM to ON. Once you set DIGITAL MODE to OVERLAP, D ZOOM settings are changed
to OFF automatically.
About FRAME REC and INT REC setting
Both settings are automatically set to off when:
•
Power switch is set to OFF or VTR.
•
Power source is disconnected.
•
PHOTO button is pressed.
Other settings retains as long as lithium battery is installed even if power source is disconnected.
Changing the Mode Settings