Sony CDX-M800 - Manual (Page 15)

15
Storing station names
— Station Memo
You can assign a name to each radio station and
store it in memory. The name of the station
currently tuned in appears in the display. You can
assign a name using up to 8 characters for a
station.
Storing the station names
1
Tune in a station whose name you
want to store.
2
Press (MENU) , then press M or m
repeatedly until “Name Edit” appears.
3
Press (ENTER) .
4
Enter the characters.
1 Press M* 1 repeatedly to select the
desired character.
A t B t C ... t 0 t 1 t 2 ... t +
t – t * ... t * 2 t A
*1 For reverse order, press m .
*2 (blank space)
2 Press , after locating the desired
character.
If you press <, you can move back to the
left.
3 Repeat steps 1 and 2 to enter the
entire name.
5
Press (ENTER) .
Tips
• Simply overwrite or enter “
” to correct or erase a
name.
• There is another way to start storing station names:
Press (LIST) for 2 seconds instead of performing
steps 2 and 3. You can also complete the operation
by pressing
(LIST) for 2 seconds instead of step 5.
Erasing the station name
1
During radio reception, press (MENU) ,
then press M or m repeatedly until
“Name Delete” appears.
2
Press (ENTER) .
3
Press M or m repeatedly to select the
station whose name you want to
erase.
4
Press (ENTER) for 2 seconds.
The name is erased.
Repeat steps 3 to 4 if you want to erase other
names.
5
Press (MENU) twice.
The unit returns to normal radio reception
mode.
Note
If you have already erased all of the station names,
“NO Data” appears in step 4.