Sony VGC-RT100Y User Manual
Page 149
149
Upgrading Your VAIO Computer
Replacing the Hard Disk Drive in the Bottom Hard Disk Bay (Port 0)
To replace the hard disk drive
1
Shut down the computer, turn off all peripheral devices, and disconnect peripheral devices from the ports and jacks on
the left and right of the computer.
2
Remove the back panel cover from the computer.
See Removing and Replacing the Back Panel Cover
for the procedure.
3
Disconnect the power cord and the peripheral devices from the back of the computer.
4
Wait about an hour until the computer cools down.
5
Push down and hold the tabs (1) on the bottom HARD DISK DRIVE ACCESS BAY (Port 0) cover (2) and slide the cover
to the left to remove it.
This manual is related to the following products: