Sony MHC-BX2 - Manual (Page 40)

40
AUDIO POWER SPECIFICATIONS:
(U.S.A. model only)
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
with 6 ohm loads both channels driven, from
120 – 10,000 Hz; rated 60 watts per channel
minimum RMS power, with no more than
10% total harmonic distortion from
250 milliwatts to rated output.
Amplifier section
Canadian model:
MHC-BX2:
Continuous RMS power output
50 + 50 watts
(6 ohms at 1 kHz,
10% THD)
European model:
MHC-BX2:
DIN power output (Rated)
40 + 40 watts
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (Reference)
50 + 50 watts
(6 ohms at 1 kHz,
10% THD)
Music power output (Reference)
100 + 100 watts
(6 ohms at 1 kHz,
10% THD)
Other models:
MHC-DX2:
The following measured at AC 110, 220 V 60 Hz:
DIN power output (Rated)
45 + 45 watts
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (Reference)
50 + 50 watts
(6 ohms at 1 kHz,
10% THD)
The following measured at AC 120, 240 V 60 Hz:
DIN power output (Rated)
50 + 50 watts
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (Reference)
60 + 60 watts
(6 ohms at 1 kHz,
10% THD)
Specifications
Inputs
MD IN:
voltage 450 mV,
(phono jacks) impedance 47 kilohms
Outputs
PHONES:
accepts headphones of
(stereo mini jack) 8 ohms or more
SPEAKER:
MHC-BX2:
accepts impedance of 6 to
16 ohms
MHC-DX2: accepts impedance of 6 to
16 ohms
CD player section
System Compact disc and digital
audio system
Laser Semiconductor laser
(
λ
=780nm)
Emission duration:
continuous
Laser output Max. 44.6
µ
W*
*This output is the value
measured at a distance of
200 mm from the
objective lens surface on
the Optical Pick-up Block
with 7 mm aperture.
Wavelength 780 – 790 nm
Frequency response 20 Hz – 20 kHz (±0.5 dB)
Signal-to-noise ratio More than 90 dB
Dynamic range More than 90 dB
CD OPTICAL DIGITAL OUT
(Square optical connector jack, rear panel)
Wavelength
660 nm
Output Level –18 dBm