Sony RM-AV3000 User Manual

Page 60

Note

You cannot program the Channel Macro
function for a macro key that has “learned” a
signal. Try again with another macro key, or
clear the “learned” signal (page 25) from the
button and program the Channel Macro
function on it.

To clear the Channel Macro
function

1 While pressing COMMANDER OFF,

press MUTING.

2 Press the SET key.
3 Press the CHMACRO key.
4 Select the component by pressing the

Component Select button or the Label
key.

5 While pressing the DEL key, press the

macro key.

Note

You can also clear the character contents you
input by following the procedure above
repeatedly.

COMMANDER

OFF

Selecting a Channel with a Single
Key Press — Channel Macro
Function (continued)

If you press the Label key for
which the Channel Macro function
cannot be programmed

“NG” flashes twice and “NG” sound is
heard.

To change the name of the macro
key (Label key)

Keep the macro key (Label key) pressed for
more than 2 seconds, and follow Steps 2 - 5,
page 24.

Press the keys for the operation in
order (1

t 2 t 3 t ENTER).

Note

If you enter more than four keys, the
last four keys are programmed for the
macro key.

Press the macro key (in this case,
VIDEO 4).

“1,” “2,” “3,” and “ENTER” appear
twice.

Press COMMANDER OFF.

If you keep COMMANDER OFF
pressed for more than 2 seconds

The Commander turns off.

If you keep COMMANDER OFF
pressed for less than 2 seconds

The Commander returns to the
previous setting mode.