Sony HDR-FX7 - Manual (Page 60)

60
.
Since the default setting is [ON], high
contrast images, such as backlit scene
images, are detected and unexposed
shadows of the images are automatically
reduced
b Note
• When you set [BACK LIGHT] to [ON],
[CNTRST ENHCR] is temporarily turned off.
x ON/OFF
You can compensate for camera shake (the
default setting is [ON]). Set [ON/OFF] to
[OFF] (
) when using a tripod (optional),
then the image becomes natural.
x TYPE
You can select the type of the SteadyShot
function that compensates for camera-
shake.
HARD
Select to activate the SteadyShot function
with stronger effect. This mode is not
recommended for recording with camera
pan, tilt technique.
B STANDARD
Select to activate the standard SteadyShot
function.
SOFT
Select to activate the SteadyShot function
so that it leaves a slight unsteadiness on the
picture so the picture looks natural.
WIDE CONV.
Select when a wide conversion lens
(optional) is attached. This mode is the
most effective with Sony VCL-HG0862
wide conversion lens.
x ON/OFF
You can display the color bar or record it on
the tape by setting to [ON]. It is convenient
to adjust the color on the monitor connected
(the default setting is [OFF]).
b Note
• This is automatically set to [OFF] the next time
you switch on the camcorder.
x TYPE
You can select the color bar type.
When you set [AF ASSIST] to [ON], you
can briefly focus manually by turning the
focus ring during the auto focus. (The
default setting is [OFF]).
CNTRST ENHCR
STEADYSHOT
COLOR BAR
AF ASSIST
TYPE 1
TYPE 2
TYPE 3
Press the MENU button t select the (CAMERA SET) by turning the SEL/PUSH EXEC
dial.