Sony SEP-30BTWHI - Manual (Page 6)

SEP-30BT 3-870-834-11(1)
10
SEP-30BT 3-870-834-11(1)
11
Rear
 Power switch (  page 26, 34, 42,
44)
ON: Power on (to play music and motion)
OFF: Power off
: Power on (for Bluetooth
communication)
When you turn on the power, the player
sounds a start-up sound and opens the
arms once. You can set the player so
that the start-up sound does not sound
(  page 37).
If you leave the player for about 30 seconds
with the Power switch set to ON or ,
the side lamps go off and the player enters
power-saving mode.
Guide to Parts and Controls (continued)
 Reset button (  page 49)
You can reset the playback position,
playback mode, and volume to the default
settings.
Even if you press the Reset button, the
data stored in the player is not erased.
 Battery lid (  page 12)
Unfasten the screw and open the battery
lid. Insert the supplied rechargeable
battery.
 USB jack (  page 13)
When you connect the player to a
computer, open the cover and plug the
USB cable into the USB jack.
When an arm has been detached
With the shoulder held securely, press
down the joints (a). Attach the arm (b),
then close the arm.
G
etting S
tar
ted
When a wheel has been detached
Determine the top and bottom sides of the
wheel. Mount the wheel into the groove of
the player.