Sony VPL-5400ES User Manual
Page 53
53
Others
This section describes about the other functions, how to solve the problems, how to
replace the lamp and air filter, etc.
About the HDMI
Control
What is the HDMI Control?
HDMI Control is an HDMI standard mutual
control function which uses the HDMI CEC
(Consumer Electronics Control)
specification. By connecting a variety of
HDMI control compatible equipment such
as a DVD recorder, an AV amplifier, etc.,
with an HDMI cable, you can operate your
equipment synchronizing with the HDMI
control compatible equipment connected to
the equipment. When using the HDMI
Control function, be sure to assign the
appropriate connection and settings.
Connecting an HDMI control
compatible equipment
Connect the projector with an HDMI control
compatible equipment using an HDMI
cable. Be sure to use a cable that has
acquired the HDMI logo for your
connection.
The HDMI Control function is available
only between Sony HDMI control
compatible equipment.
Setting the HDMI Control
Be sure to assign the appropriate
connections for both the projector and the
HDMI control compatible equipment
connected to the projector. For settings of
the projector, see
the HDMI control compatible equipment
connected to the projector, refer to its
operational instructions.
What you can do with the
HDMI Control
• System Standby
You can power off the projector and the
HDMI control compatible equipment
connected to the projector at the same
time.
• One Touch Play
When the HDMI control compatible
equipment connected to the projector is
played back, the projector is also
automatically powered on, and its input
setting is synchronized at the same time.
• To operate the connected equipment, be
sure the equipment is HDMI control
compatible and assign the appropriate
settings to use the HDMI Control function.
• Depending on the connected equipment,
the HDMI Control function may not work
appropriately. For the settings of the
connected equipment, refer to the
operating instructions of the equipment.
Others
Note
Notes