Sony VPL-5400ES - Manual (Page 28)

28
Tips
• When “Auto Input Search” is set to “On” in the Function
menu, the input terminal with
effective signals is automatically displayed by pressing INPUT.
• When the “HDMI Control” is set to “On” in the Function menu, the input terminal with
effective signals is automatically displayed, synchronizing with the operation of the equipment
connected to HDMI 1 or HDMI 2 input of the projector.
1
Press the ? / 1 (ON/STANDBY) switch.
A message “POWER OFF?” appears on the screen.
2
Press the ? / 1 (ON/STANDBY) switch again before the message
disappears.
The ON/STANDBY indicator flashes in green and the fan continues to run to reduce the
internal heat. First, the ON/STANDBY indicator flashes quickly, during which you will
not be able to light up the ON/STANDBY indicator with the
? / 1 (ON/STANDBY) switch.
3
Confirm that the fan stops running and the ON/STANDBY indicator lights
in red.
You can turn off the projector by holding the ? / 1 (ON/STANDBY) switch for about one
second, instead of performing the above steps.
Turning Off the Power