Sony MVC-CD350 User Manual

Page 95

oub

hoot

Others

Symptom

Cause

Solution

Your camera does not
work.

• You are not using an “InfoLITHIUM” battery

pack.

• The battery level is low. (The E indicator

appears.)

• The AC Adaptor is not connected securely.

p Use an “InfoLITHIUM” battery pack (page 109).

p Charge the battery pack (page 11).

p Connect it securely to the DC IN jack of your camera and to a

wall outlet (page 14).

The power is on, but the
camera does not work.

• The built-in microcomputer is not working

properly.

p Disconnect, and then, after one minute, reconnect all power

sources and turn on the camera. If this does not work, press the
RESET button on the bottom of the camera using a fine-tipped
object, then turn on the power again. (All the settings including
date and time are cleared.)

You cannot identify an
indicator on the screen.

—

p Check the indicator (page 113).

The lens gets fogged.

• Moisture condensation has occurred.

p Turn off the camera and leave for about an hour at room

temperature for the moisture to evaporate before use (page 108).

A file error occurs when
you play back a file.

• The image file has an error.
• The image was not recorded correctly.
• The disc is dirty
• The disc may be scratched.

—
—
p Clean the disc (page 108).
p Replace the disc.