Sony SU-XWQ005 - Manual (Page 9)

7
(US)
US
Step 4: Prepare for the
installation of
the Display Unit
Attach the hooks for fixing the
Mounting Hook Units to the
Display Unit.
1 Place the Display Unit, with its screen facing
down, on a stable, cloth-covered work
surface.
Note
The Display Unit should be handled by at least two
people.
z Hint
There are finger slots located at the bottom of the
Display Unit on both sides for holding. When
installing the Display Unit, use the slot to support the
bottom and hold the top with your other hand.
2 Attach the supplied four hooks with the four
supplied screws (M5
× L16).
Note
When using an electric screwdriver, set the torque
setting to approximately 2 N·m.
Rear side of Display Unit
Soft cloth
Bottom of Display Unit
This Display
Unit has finger
slots on both
sides at the
bottom for
holding.
Hook
(supplied)
Screw (supplied M5 × L16)