Sony SU-XWQ005 - Manual (Page 4)

2
(US)
On Safety
Sony products are designed with safety in mind.
If the products are used incorrectly, however, it may
result in a serious situation like fire, electric shock, the
product toppling over, or the product dropping. Be
sure to observe the precautions for safety to prevent
such accidents.
For Customers
WARNING
If the following precautions are not observed,
serious injury or death through fire, electric
shock, the product toppling over, or the product
dropping can result.
Be sure to subcontract the
installation to qualified contractors
and keep small children away during
the installation.
If the Wall-Mount Bracket or the
Display Unit is not installed
correctly, the following
accidents may occur. Be sure to
have qualified contractors carry
out installation.
• The Display Unit may fall and cause a bruise or
serious injury such as a fracture.
• If the wall on which the Wall-Mount Bracket is
installed is unstable, uneven, or not perpendicular to
the floor, the unit may fall and cause injury or
property damage. The wall should be able to
support a weight of at least four times the Display
Unit weight. (See the Display installing dimensions
table on page 11 for the Display Unit weight.)
• If the installation of the Wall-Mount Bracket on the
wall is not sufficiently sturdy, the unit may fall and
cause injury or property damage.
Be sure to subcontract moving or
dismounting of the Display Unit to
qualified contractors.
If persons other than qualified contractors transport or
dismount the Display Unit, it may fall and cause injury
or property damage. Be sure to have two or more
persons carry or dismount the Display Unit.
Do not remove screws, etc., after
mounting the Display Unit.
If you do so, the Display Unit may fall and cause injury
or property damage.
Do not disassemble or make
alterations to the Wall-Mount
Bracket.
If you do so, the Wall-Mount
Bracket may fall and cause
injury or property damage.
Do not mount any equipment other
than the specified product.
This Wall-Mount Bracket is designed for the use with
the specified product only. If you mount equipment
other than specified, it may fall or break, and cause
injury or property damage.
Do not cover the ventilation holes of
the Display Unit.
If you cover the ventilation
holes (with a cloth, etc.), heat
build up inside may cause fire.
Do not apply any load other than
the Display Unit on the Wall-Mount
Bracket.
If you do so, the Display Unit
may fall and cause injury or
property damage.
Do not lean on or hang from the
Display Unit.
Do not lean on or hang from the
Display Unit as it may fall on
you and cause serious injury.
Do not expose the Display Unit to
rain or moisture.
It may cause a fire or an electric shock.