Sony DCR-PC110 - Manual (Page 15)

15
Recording – Basics
6
4
2
5
1
3
POWER
LOCK VCR
MEMORY
CAMERA
OFF(CHR)
POWER
LOCK VCR
MEMORY
CAMERA
OFF(CHR)
40min REC 0:00:01
— Recording – Basics —
Recording a picture
Your camcorder automatically focuses for you.
(1) Remove the lens cap and pull the lens cap string to fix it.
(2) Install the power source and insert a cassette. See “Step 1” and “Step 2” for
more information (p. 10 to p. 14).
(3) Pull down the Holding Grip.
Hold your camcorder firmly as illustrated.
(4) Set the POWER switch to CAMERA while pressing the small green button.
Your camcorder is set to the standby mode.
(5) Press OPEN to open the LCD panel.
(6) Press START/STOP. Your camcorder starts recording. The REC indicator
appears. The camera recording lamp located on the front of your camcorder
lights up. To stop recording, press START/STOP again.
Notes
•Fasten the grip strap firmly.
•Do not touch the built-in microphone during recording
Note on Recording mode
Your camcorder records and plays back in the SP (standard play) mode and in the LP
(long play) mode. Select SP or LP in the menu settings. In the LP mode, you can record
1.5 times as long as in the SP mode.
When you record a tape in the LP mode on your camcorder, we recommend playing the
tape on your camcorder.
LOCK
Microphone
Camera recording
lamp