Sony DSC-U40 User Manual

Page 74

Others

Symptom

Cause

Solution

Your camera does not work.

• The battery level is low. (The E indicator

appears.)

• The USB cable is connected.

p Charge the batteries (page 10).

p Disconnect the USB cable (pages 58 a nd 65).

The power is on, but the
camera does not work.

• The built-in microcomputer is not working

properly.

p Remove the batteries, then install them again after about one

minute and turn on the camera. If the functions still do not work,

press the

RESET

button located on the bottom of the camera

using

a fine-tipped object, then turn the power on again (page 67). (If
you press the RESET button, all settings including the date and
time are cleared.)

You cannot identify an
indicator on the LCD screen.

—

p Check the indicator (pages 87 and 88).

The lens gets fogged.

• Moisture condensation has occurred.

p Turn off the camera and leave it for about an hour at the room

temperature for the moisture to evaporate before use (page 81).