Sony XAV-72BT - Manual (Page 52)

52
Item Option Purpose Unit status
Subwoofer
Sets the subwoofer connection
status.
ON (z) To set the connection status
to on.
No source
selected
OFF To set the connection status
to off.
RBE (Rear Bass Enhancer)
(page 45)
Uses rear speakers like
subwoofers.
OFF (z),
RBE1, RBE2,
RBE3 To select the mode.
During reception/
playback
Crossover Filter
Selects the cut-off frequency
of the front/rear speakers
(HPF) and subwoofer (LPF).
LPF: 50 Hz,
60 Hz, 80 Hz,
100 Hz (z),
120 Hz To select the cut-off
frequency. (Available only
when “Subwoofer” is set to
“ON.”)
During reception/
playback
HPF: OFF (z) To not cut out the
frequencies.
HPF: 50 Hz,
60 Hz, 80 Hz,
100 Hz, 120 Hz To select the cut-off
frequency.
Subwoofer
Phase:
Normal (z),
Reverse To select the subwoofer
phase. (Available only
when “Subwoofer” is set to
“ON.”)
4.1ch Speaker Level
(page 45) – – No source
selected