Disconnecting the camera from the computer, Cyber-shot user guide – Sony DSC-TF1 User Manual
Page 136
Search
Confirming the operation
method
Top page > Using with your computer > Importing images to a computer > Disconnecting the camera
from the computer
Disconnecting the camera from the computer
Perform the procedures from step
1 to 2 below before:
Disconnecting the cable.
Removing a memory card.
Inserting a memory card into the camera after copying images from the internal memory.
Turning off the camera.
1. Click the disconnect icon ( ) on the tasktray.
With Windows 7 and Windows 8, click
first, then click
.
2. Click [Safely remove USB Mass Storage Device].
Notes
Drag and drop the icon of the memory card or the drive icon to the “Trash” icon beforehand when
you use a Mac computer, and the camera is disconnected from the computer.
The disconnect icon may not appear when you use a Windows 7 computer. In this case, you can
disconnect the camera from the computer without following the above steps.
Copyright 2013 Sony Corporation
136