Sony PCG-FX240K - Manual (Page 63)

Before you start
63
3 After the notebook has cooled, loosen and remove the screw that secures the
cover of the memory bay on the bottom of your notebook. Use an
appropriate screwdriver.
4 Touch a metal object (such as the connector panel on the back of your
notebook) to discharge any static electricity.
5 Remove the memory module.
6 Tighten the screw on the memory bay cover.
To install a memory module
1 Follow steps 1 to 4 of “To remove a memory module” .
2 Remove the memory module from its packaging.
Removing the memory module cover
Removing memory module
Screwdriver
Screw
2 Pull the memory module in
the direction of the arrow.
1 Pull the tabs in the direction of the arrows.
The memory module is released.
1
2
1