American Dryer Corp. MDG-120PVV - Manual (Page 15)

113395 - 6 Maytag Co. 13
3. Exhaust Transition Piece
Inside the basket (tumbler) of this dryer is an exhaust
transition piece that must be installed on the outlet
of the exhaust before any further venting is connected:
a. Remove the exhaust transition piece from the
basket (tumbler) and place it on the exhaust outlet.
b. Using the screws provided, secure the exhaust
transition piece to the dryer.
NOTE: It is recommended that this joint be
taped as well as ALL other duct joints to
prevent moisture and lint from escaping
into the building.
WARNING
An exhaust duct transition piece is shipped inside of the dryer’s
tumbler and must be installed on the dryer’s
exhaust duct, with the hardware provided, BEFORE
location venting is connected to the dryer.
THIS EXHAUST DUCT TRANSITION PIECE
MUST BE INSTALLED FIRST!
Failure to observe this installation requirement may result in
damage to the dryer, create a FIRE HAZARD and will VOID
the manufacturer’s warranty.
012999JEV-GS/cj P/N: 114092