Sony AIR-SA20PK - Manual (Page 37)

AIR-SA20PK.GB.4-117-793-11(1)
GB
O
thers
To change the AM tuning interval
The AM tuning interval is factory-preset
to 10 kHz.
Use the main unit to change the AM
tuning interval.
1
Tune.in.any.AM.station.
2
Press.SYSTEM.MENU.on.the.unit.
3
Press.TUNING/SELECT.+/.on.the.
unit.repeatedly.until.“AM.STEP”.
appears,.then.press.ENTER.on.the.
unit.
4
Press.TUNING/SELECT.+/.on.the.
unit.repeatedly.to.select.“9K”.or.“10K,”.
then.press.ENTER.on.the.unit.
“OK” appears.
5
Press.ENTER.on.the.unit.again.to.
confirm.the.setting.
When you change the interval, all
the AM preset stations are erased. To
reset the interval to the factory preset,
repeat the procedure.
To reset the main unit to factory
settings
If the main unit still does not operate
properly, reset the main unit to factory
settings.
1
Disconnect.and.reconnect.the.power.
supply.cord,.and.then.turn.on.the.
unit.
2
Press.SYSTEM.MENU.on.the.unit.
3
Press.TUNING/SELECT.+/.on.the.
unit.repeatedly.until.“RESET”.appears,.
then.press.ENTER.on.the.unit.
“RESET OK” appears.
4
Press.ENTER.on.the.unit.again.to.
confirm.the.setting.
All user-configured settings are
deleted, such as preset radio stations.
To reset the sub unit to factory
settings
If the sub unit still does not operate
properly, reset the sub unit to factory
settings.
1
Disconnect.and.reconnect.the.power.
cord,.and.then.turn.on.the.unit.
2
Press./CANCEL,.DISPLAY.and..
on.the.unit.at.the.same.time.
All user-configured settings, such as
timer, clock, etc. are deleted.