Printing images – Sony DSC-T1 User Manual
Page 3
3
When [USB Connect] is not set
to [PictBridge] on the Setup
screen
Even if you turn on the camera, you cannot
use the PictBridge function.
Set [USB Connect] to [PictBridge].
1
Press MENU and select [USB Connect],
then press z.
2
Select [PictBridge] with v, then press
z.
Printing images
Mode switch:
/
/
You can select the image and print it. Set up
the camera following the procedure on page
2, and connect the printer.
•
You cannot print movies.
•
When you print an E-mail image, only the
JPEG image that was recorded at the same time
is printed.
•
When an error notification is received from the
connected printer, the
indicator flashes for
approximately 5 seconds. Check the connected
printer.
In single-image mode
a
Display the image you want to
print with
b
/
B
.
b
Press MENU.
The menu appears.
c
Select
(Print)
with
b
/
B
, then
press
z
.
d
Select [This image] with
v
/
V
,
then press
z
.
The print setting screen appears.
•
Items that the printer does not support are
not displayed.
e
Select [Quantity] with
v
/
V
,
select the number of sheets
with
b
/
B
.
You can select the number up to 20.
PTP
Normal
PictBridge
USB Connect
Mode switch
MENU
Control button
101
2/9
5M
Exit
OK
1
Off
Off
Index
Date
Quantity