Sony DCR-TRV30 - Manual (Page 122)

122
Recording an image from a tape as a still image
Recording a still image from other equipment
Before opration
Set DISPLAY to LCD in the menu settings. (The default setting is LCD.)
(1) Set the POWER switch to VCR.
(2) Play back the recorded tape, or turn the TV on to see the desired program.
The image of the other equipment is displayed on the screen.
(3) Follow steps 3 and 4 on page 120.
Using the A/V connecting cable
Connect the yellow plug of the A/V connecting cable to the video jack on the VCR or
the TV.
If your TV or VCR has an S video jack
Connect using an S video cable (optional) to obtain high-quality pictures.
With this connection, you do not need to connect the yellow (video) plug of the A/V
connecting cable.
Connect an S video cable (optional) to the S video jacks of both your camcorder and the
TV or VCR.
This connection produces higher quality DV format pictures.
Using the i.LINK cable (DV connecting cable)
AUDIO
S VIDEO
VIDEO
OUT
AUDIO/
VIDEO
S VIDEO
: Signal flow
DV
DV OUT
DV IN/OUT
: Signal flow
(optional)