Tv & avr, Tv control setting, Av receiver setting – Sony NSZ-GT1 User Manual

Page 69: Enable tv control

> Settings > TV & AVR

TV & AVR

TV control setting
AV Receiver setting
Enable TV control

TV control setting

Set the Keypad to control the TV.

Press Fn + 1 and select [TV & AVR] - [TV control setting].

AV Receiver setting

Set the Keypad to control the connected AV Receiver via an IR Blaster cable. Confirm that the IR

Blaster is connected and placed properly.

Press Fn + 1 and select [TV & AVR] - [AV Receiver setting].

Check the box next to [Control with IR Blaster] and select the manufacturer of your AV Receiver,

then set the IR Blaster code for your AV Receiver. To verify the IR Blaster setting, select [IR

Blaster test].

Enable TV control

Set a third-party controller (optional controller) to control the TV via an IR Blaster cable. Confirm

that the IR Blaster is connected and placed properly.

Press Fn + 1 and select [TV & AVR], and check the box next to [Enable TV control], then follow

the on-screen instructions to control the TV.

To change the IR Blaster code, press Fn + 1 and select [TV & AVR] - [TV & volume control

settings] - [TV control setting].

Select [Volume control setting] to choose whether to control the TV speaker volume or the AV

Receiver volume.

TV & AVR

Help Guide

FAQ

NSZ-GT1