Step 3: adjusting the picture size and position, Plug the ac power cord into a wall outlet, Press the [ / 1 (on/standby) – Sony VPL-HS20 User Manual
Page 19: Switch to turn on the projector, Turn on the equipment connected to the projector, Press input to project the picture on the screen
Step 3: Adjusting the Picture Size and Position
Con
n
ect
ions a
n
d
P
repar
ati
o
n
s
19
GB
Step 3: Adjusting
the Picture Size
and Position
Tip
The ?/
1
(on/standby), INPUT, MENU, and
M/m/
(joystick) buttons on the side panel of the projector function the
same as those on the remote control.
1
Plug the AC power cord into a
wall outlet.
The ON/STANDBY indicator lights in red and
the projector goes into standby mode.
2
Press the
[
/
1
(on/standby)
switch to turn on the projector.
The ON/STANDBY indicator lights in green.
3
Turn on the equipment
connected to the projector.
Refer to the operating instructions of the
connected equipment.
4
Press INPUT to project the
picture on the screen.
Each time you press the button, the input
indication changes. (
+
–
+
–
INPUT
LIGHT
STANDARD
CINEMA
DYNAMIC
USER 2
PICTURE MODE
USER 3
USER 1
MS SLIDE
MENU
APA
LENS
VOLUME
SIDE SHOT
RESET
WIDE MODE
ENTER
6
5,7
Adjuster adjustment
button
Adjuster
4
2
Rear remote control
detector
6
Front remote control
detector
ON/
STANDBY
Lights in red.
ON/
STANDBY
Lights in green.
INPUT
NTSC 3.58
V i d e o 1