Sony DCR-DVD100 - Manual (Page 38)

38
To select the still image size (DCR-DVD200/DVD300 only)
You can select either of 2 image sizes, 1152
×
864 or 640
×
480. The default setting is
1152
×
864.
1
Set the mode dial to (Still).
2
Press SETUP.
3
Select (CAMERA SET) with v/V, then press ENTER.
4
Select [IMAGESIZE] with v/V, then press ENTER.
The amount of recording data varies depending on the settings for image size.
5
Select the desired image size with v/V, then press ENTER.
The indicator changes as follows:
6
Press SETUP
The SETUP display disappears from the LCD display.
File size of still images
Image quality File size
640
×
480 image size 1152
×
864 image size*
FINE 150 KB 500 KB
STANDARD 60 KB 200 KB
The table shows approximate file size.
* DCR-DVD200/DVD300 only.
Tip
The image size is 640
×
480 for DCR-DVD100.
Shooting movies/still images
[ SETUP ] : END
SELFTIMER
BURST
QUALITY OFF
N. S. LIGHT
RETURN
IMAGESIZE
CAMERA SET
1152 640
[ SETUP ] : END
SELFTIMER
BURST
QUALITY
1152 x 864
N. S. LIGHT
RETURN
IMAGESIZE
CAMERA SET
REMAIN
[2000]
640 x 480
[ SETUP ] : END
PROGRAM AE
FLASH MODE
FLASH LVL
WHT BAL
MANUAL SET