Sony DSC-T200 - Manual (Page 72)

72
Settings For details on the operation 1 page 67
Enables you to perform calibration when the touch panel buttons do not react at the
appropriate points where you touch.
Using the paint pen, touch the × mark displayed on the screen.
To stop the calibration process mid-way, touch [Cancel]. The adjustments made up to that
point are not effected.
The × mark moves on the screen.
If you fail to press the right spot, the calibration is not performed. Press the × mark again.
Changes the function of some buttons to operate the camera installed in the Marine Pack.
The buttons will work as follows when the setting is [On].
– Objects cannot be brought into focus by touching the screen.
– When [Spot AF] is selected, operation brings the center section into focus.
– During playback, playback zoom operation cannot be performed.
– During playback, sliding the zoom (W/T) lever moves screen playback forward or
backward.
– The screen display is always [Normal].
– Some functions are limited. (The icons are not displayed.)
• For details, see the operating instructions supplied with the Marine Pack.
Calibration
Housing
On ( ) Changes the function of the buttons.
Off Does not change any functions.