beautypg.com

The set setting menu, The install setting menu, Status (on-screen display) – Sony VPL-VW10HT User Manual

Page 27: Input-a, Input-b, Language, Power saving, Sircs receiver, Keystone mem

background image

27

(GB)

The SET SETTING Menu

The SET SETTING menu is used for changing the
settings of the projector.

STATUS (on-screen display)

Sets up the on-screen display.

ON: Shows all of the on-screen displays.
OFF: Turns off the on-screen displays except for the

menus, a message when turning off the power,
and warning messages.

INPUT-A

Selects the computer, component, DTV YP

B

P

R

or

DTV GBR signal input from the INPUT A
connectors.

Note

If the setting is not correct, “Please check INPUT-A
setting.” appears on the screen and the color of the
picture becomes strange or the picture is not
displayed.

INPUT-B

Selects the computer, component, DTV YP

B

P

R

or

DTV GBR signal input from the INPUT B
connectors.

Notes

• If the setting is not correct, “Please check INPUT-B

setting.” appears on the screen and the color of the
picture becomes strange or the picture is not
displayed.

• Set the progressive component signal, e.g. DVD, to

“COMPONENT”; 15k RGB signal, e.g. game
machines, to “COMPUTER”.

LANGUAGE

Selects the language used in the menu and on-screen
displays.
Available languages are: English, French, German,
Italian, Spanish, Japanese and Chinese.

POWER SAVING

When set to ON, the projector goes into the power
saving mode if no signal is input for 10 minutes.
The power saving mode is canceled when a signal is
input or any key is pressed.

SIRCS RECEIVER

Selects the remote control detectors (SIRCS receiver)
on the front and rear of the projector.

FRONT & REAR: Activates both the front and rear

detectors.

FRONT: Activates the front detector only.
REAR: Activates the rear detector only.

The INSTALL SETTING
Menu

The INSTALL SETTING menu is used for changing
the settings of the projector.

KEYSTONE MEM

ON: DIGIT KEYSTONE setting is stored.

The data is retrieved when the projector power is
turned on. The setting will remain the same every
time.

OFF: DIGIT KEYSTONE is reset to 0 when the

power is turned on the next time.

SET SETTING

STATUS:

ON

INPUT-A:

COMPONENT

INPUT-B:

COMPONENT

LANGUAGE:

ENGLISH

POWER SAVING: OFF

SIRCS RECEIVER:

FRONT&REAR

INPUT-A

The SET SETTING Menu / The INSTALL SETTING Menu

INSTALL SETTING

KEYSTONE MEM: OFF

DIGIT KEYSTONE: 01

INSTALLATION:

FLOOR-FRONT

CINEMA BLACK: ON

LAMP TIMER: 234h

INPUT-A