Bluetooth connection – Sony DR-BTN200 User Manual

Page 77

BLUETOOTH connection

Pairing cannot be done.

Bring the headset and the BLUETOOTH device closer together.

Cannot make a BLUETOOTH connection.

Check that the headset is turned on.

Check that the BLUETOOTH device is turned on and the BLUETOOTH

function is on.

Connection with the BLUETOOTH device may not be memorized on the

headset. Make a BLUETOOTH connection from the BLUETOOTH device to

the headset soon after pairing is complete.

The headset or the BLUETOOTH device is in sleep mode.

The BLUETOOTH connection is terminated. Make the BLUETOOTH

connection again.

Distorted sound

Make sure that the headset is not receiving interference from a wireless LAN,

other 2.4 GHz wireless device, or microwave oven.

The correspondence distance is short. (Sound skips.)

If a device that generates electromagnetic radiation, such as a wireless LAN,

other BLUETOOTH device(s), or a microwave oven is nearby, move the

headset away from such sources.

Point the antenna of the headset towards the BLUETOOTH device. Make sure

no obstacles blocks the communication.

The headset does not operate properly.

Reset the headset. Pairing information is not deleted by this operation.