Sony DR-BTN200 User Manual

Page 41

To delete all pairing information, see “What can I do to solve a problem?”

Notes

For details, refer to the operating instructions supplied with the BLUETOOTH

device.

When pairing with a BLUETOOTH device that cannot display a list of detected

devices or that has no display, you may pair the device by setting both the

headset and the BLUETOOTH device to pairing mode. At this time, if passkey is

set besides “0000” on the BLUETOOTH device, pairing cannot be done with the

headset.

Once BLUETOOTH devices are paired, there is no need for pairing again,

except in the following cases:

Pairing information is deleted after repair, etc.

The headset is paired with 9 or more devices. The headset can be paired with

up to 8 devices; if a new device is paired after 8 devices have been paired, the

device whose latest connection time is the oldest among the 8 paired devices

is replaced by the new one.

When recognition of the headset by the device to be connected is deleted.

The headset is initialized. All pairing information is deleted.