American Power Conversion RT-UXICH - Manual (Page 3)

1
Introduction
The APC Smart-UPS® RT is a high-performance, uninterruptible power supply (UPS) that provides
protection for electronic equipment from utility power blackouts, brownouts, sags and surges. The
UPS filters small utility line fluctuations and isolates electronic equipment from large disturbances
by internally disconnecting from utility line power. The UPS provides continuous power from the
internal battery until utility power returns to safe levels or the battery is fully discharged.
I
NSTALLATION
Read the Safety Instruction sheet before installing the UPS.
Unpacking
Inspect the UPS upon receipt. Notify the carrier and dealer if there is damage.
The packaging is recyclable; save it for reuse or dispose of it properly.
Check the package contents:
„
UPS
„
Front bezel
„
Literature kit containing:
„
Product documentation, Safety Guide,
and Warranty information
„
Smart-UPS RT User Manuals CD
„
Software CD
„
Ground wire
„
Serial cable
„
Battery cable assembly
„ 3000 VA XLI models: three output power cords,
two input power cords
„ 5000/6000 VA XLI models: six output power
cords, Network Management Card
documentation
Specifications
T EMPERATURE
O PERATING
S TORAGE
32° to 104° F (0° to 40° C)
5° to 113° F (-15° to 45° C) charge the UPS
battery every six months
M AXIMUM
E LEVATION
O PERATING
S TORAGE
10,000 ft (3,000 m)
50,000 ft (15,240 m)
This unit is intended for indoor use only.
Select a location sturdy enough to
handle the weight.
Do not operate the UPS where there is
excessive dust or the temperature and
humidity are outside the specified limits.
Ensure that the air vents on the front
and rear of the UPS are not blocked.
H UMIDITY 0 to 95% relative humidity
W EIGHT
UPS
UPS
WITH
P ACKAGING
120 lbs (55 kg)
140 lbs (64 kg)