Airlink101 ANAS350 - Manual (Page 11)

11
If you ever change the username or password and forget, you will need to perform the
factory reset procedure to reset the system to factory defaults. To do this: Press and
hold both the “Shutdown” and “Backup” buttons simultaneously for 6 seconds to reset
the device to factory default settings.
Method 2: Use your web browser such as Internet Explorer or Firefox.
To use your
web browser, open up the browser and in the Address bar type in http://airnas and
press Enter or hit the Go button.
(Optional: You can also type in the IP address of the NAS device instead of using its
host name airnas . Typically if you have the NAS connected directly to your computer
(and are not using a router) the default IP address is 192.168.1.230.