Sony MDR-DS8000 - Manual (Page 15)

SONY MDR-DS8000 (GB) 3-238-629-13(1) CEK/CED/UC2
Connection
15 GB
AC power
adaptor
To the wall outlet
Unified polarity plug
Processor
To DC IN jack
Plugging into the wall outlet
Setting Connected components
0dB TV, portable components, and other components with a low output level
–8dB Other components (initial settings)
Notes
• Be sure to lower the volume before setting the ATT switch.
• If audio input to the LINE INPUT jacks is distorted (sometimes, noise can be heard at the same
time.), set the ATT switch to “–8dB”.
Setting the input level
If the volume is low using analogue input, set the ATT (attenuator) switch to “0dB”.
0dB
ATT
–8dB
• Be sure to always use the supplied AC power adaptor. Even AC power adaptors having the
same voltage and plug polarity can damage this product due to the current capacity or other
factors.
Notes
• Be sure to use the supplied AC power adaptor. Using AC adaptors with different plug polarity
or other characteristics can cause product failure.