Sony ICD-BM1VTP2 - Manual (Page 60)

60 GB
Error message
“LOW
BATTERY“
“LOW DC-IN”/
“HIGH DC-IN”
“MEMORY
STICK ERROR“
MEMORY
STICK
LOCKED“
“MOVE
CONTROL KEY
TO STOP
POSITION”
“FULL”
“NO MEMORY
SPACE”
“NO MEMORY
STICK“
“NO
MESSAGE“
“PLEASE SET
DATE&TIME”
“UNKNOWN
DATA“
For the error messages of the “Digital Voice Editor”, please refer to the
online Help files.
Cause/Remedy
•Batteries are weak. Replace batteries with new
ones.
•An AC power adaptor that is not compatible
with the IC recorder is connected. Make sure to
use the AC power adaptor for the IC recorder.
•Insert the “Memory Stick“ again. After inserting,
if this message is displayed again, the inserted
“Memory Stick“ may be out of order.
•The write-protect switch on the inserted
“Memory Stick” is set to “LOCK“ (page 55). You
cannot record, edit or format in this condition.
Release the switch and insert the “Memory
Stick“ again.
•The control key is at a position other than STOP
although the unit stops. To proceed with the
operations, make sure to slide the control key to
STOP.
•Because there are already 999 messages in a
folder or the remaining memory of the “Memory
Stick” is short, you cannot record a message.
Erase some messages before recording.
•The remaining memory of the “Memory Stick” is
too small. Erase some messages before recording
(page 28).
•Insert the “Memory Stick“ again if already
inserted.
•The selected folder does not have any messages.
You cannot set the alarm, etc. because of this.
•If you do not set date and time, you cannot make
alarm setting. To set date and time, see page 8.
•The unit cannot play or erase the selected
message because the file type is different.
Troubleshooting (continued)