Using convenient functions while recording, Advanced vor, Monitoring recording – Sony ICD-BM1VTP2 User Manual
Page 16: Review, Recording messages (continued)
16
GB
Recording Messages (continued)
Using Convenient Functions while Recording
Reviewing the recording
Slide the control key to B.SPACE. You can search backwards while
listening to fast playback sound. After you slide the control key to PLAY,
playback starts from that point. You can add an overwrite recording from
that point.
Monitoring the recording
When recording, you can connect an ear receiver supplied or not supplied
to the i (headphones) jack and monitor the recording from the connected
ear receiver. You can adjust the volume with VOL +/–, but the recording
level is fixed.
Note
If you turn up the volume excessively or place the ear receiver near the
microphone while monitoring recording, the microphone may pick up the
sound from the ear receiver, causing acoustic feedback (howling sound).
Starting recording automatically in response to the sound
— Advanced VOR function
Slide the VOR (voice operated
recording) switch to ON during stop or
recording mode.
Set the control key to REC. Recording
starts when the unit detects sound, and
“VOR” appears in the display window.
The recording pauses when no sound is
detected, and “VOR PAUSE” appears.
Notes
• Recording will not be started unless the control key is set to REC.
• VOR function is affected by the sound around you. Set the MIC SENS
(microphone sensitivity) switch according to the recording conditions. If
recording is not satisfactory after you have changed the microphone
sensitivity, or for important recording, set the VOR switch to OFF.