Sony ICD-BM1VTP2 - Manual (Page 21)

Basic Operations
21 GB
Slide the control key to STOP.
The unit stops at the current position. (When
the unit reaches to the end of the last
message in step 3, it stops at the end of the
last message.)
You can start an overwrite recording from
the point (page 15).
Stop playback.
4
Start playback.
1 Slide the control key to PLAY.
2 Adjust the volume with VOL +/– .
* The display selected with the DISPLAY button
(page 26) appears.
The unit plays back all the messages in a folder
continuously. At the end of each message, a beep
will sound.
When the unit reaches to the end of the last message in a folder, “MSG END” will
flash 3 times with a beep and playback stops. Move the control key to STOP.
1 To listen from an ear receiver
Connect the supplied ear receiver to the i (headphones) jack. The built-in
speaker will be automatically disconnected.
1 To listen from an external speaker
Connect an active or passive speaker (not supplied) to the i (headphones) jack.
Note
Playback after the overwrite recording starts from the beginning of the message.
Playback after a stop starts from the point where you stopped playback.
i jack
OPR indicator
(lights in green during
playback)
3
Counter display*
Continued