Sony MHC-GX8800 User Manual
Page 8
MHC-GN800 4-244-569-11 (1)
8
GB
3 Connect the subwoofer
(MHC-GN800 only).
Connect the subwoofer cords to the
SUBWOOFER terminals and the system
cord to the SYSTEM CONTROL jack. Be
sure to match the color of the cord and
terminals/jacks.
Notes
• Be sure to make this connection before you connect
the main unit’s power cord to a wall outlet.
• Place the subwoofer at least 0.3 meters (1 feet)
away from the main unit.
4 Connect the FM and AM antennas.
Set up the AM loop antenna, then connect
it.
To disconnect
+
Insert only the stripped portion.
Black/Stripe (#)
Grey/Solid (3)
Grey
220V
120V
230-
VOLTAGE SELECTOR
240V
Extend the FM lead
antenna horizontally
AM loop antenna
5 For models equipped with a voltage
selector, set VOLTAGE SELECTOR to
the position of your local power line
voltage.
6 Connect the power cord to a wall outlet.
The demonstration appears in the display.
When you press ?/1, the system turns on
and the demonstration automatically ends.
If the supplied adaptor on the plug does not
fit your wall outlet, detach it from the plug
(only for models equipped with an adaptor).
To connect optional components
See page 28.
To attach the speaker pads
Attach the supplied speaker pads to the bottom
of the speakers to stabilize the speakers and to
prevent them from slipping.
SUBWOOFER terminals
SYSTEM CONTROL jack
–AM
FM75
Ω
COAXIAL