Sony PEG-NZ90 - Manual (Page 80)

Customizing your Sony CLIÉ™ handheld (Preferences) 80
Adjusting the Digitizer
You need to adjust the digitizer when performing a hard reset, when the tapping
operation or scrolling does not work properly, or when you cannot adjust the
brightness of the back light or screen contrast.
1
Tap the arrow in the top right-hand corner of the
Preferences screen and select Digitizer.
The Digitizer calibration screen is displayed.
This Digitizer calibration screen is exactly the same as the screen
displayed the first time you turn on your CLIÉ handheld. Follow the
on-screen instructions to adjust the digitizer.
Tip
Use the stylus perpendicular to the screen to tap targets.