Sony PEG-NZ90 - Manual (Page 61)

Exchanging and updating data using a HotSync
®
operation 61
Performing a HotSync
®
operation
Note
Do not remove your CLIÉ handheld from the cradle until the
HotSync
®
operation is complete as the Palm™ Desktop for CLIÉ
software may not close normally.
If the HotSync
®
operation does not start
Make sure that the HotSync icon is displayed in the
Windows task tray.
If the HotSync
icon is not displayed in the task tray, click
Start, Programs (All Programs in Windows
®
XP), Sony
Handheld, and HotSync Manager. Check that the
HotSync
icon is displayed in the task tray and press the
HotSync button on the cradle to start the HotSync
®
operation.
The message is displayed on your computer screen when the
HotSync
®
operation starts.
* From this point onwards, where Windows XP Home Edition and
Windows XP Professional are common, they will both be referred to
as Windows XP.
Tip
If you cannot perform a HotSync
®
operation
Refer to the “Troubleshooting Q&A.”