Sony XAV-65 - Manual (Page 13)

13
GB
Steering Control
You can operate the unit with buttons on the
steering wheel.
For safety, park your car before making this
setting.
Unit status: Any status
User Defined
This setting is available only when [Steering
Control] is set to [User].
The steering button panel appears. Press and hold
a button to be assigned to the steering wheel.
Then press and hold the respective button on the
steering wheel.
Unit status: Any status
Note
This function may not be available on some vehicles.
Sound Settings
Rear/Sub Out
Switches the audio output between the rear
speakers and subwoofer.
Unit status: Any status
Sound Adjust
Selects EQ3 and adjusts subwoofer level, balance/
fader level or crossover filter.
Unit status: Any status
Screen Settings
Demo
Unit status: Any status
Option Purpose
User To display the instruction and
panel for steering wheel control.
External ( ) To deactivate steering wheel
control.
To use rotary commander
control.
Option Purpose
– To display the instruction and
control panel.
Option Purpose
Rear To output audio signals to the
rear speakers (amplifier).
Subwoofer (
) To output audio signals to the
subwoofer.
Option Purpose
EQ3
OFF ( ), R&B,
Pop, Rock,
Hip-Hop,
Dance,
Country,
Custom
To select the equalizer curve;
customize the equalizer curve.
When setting [Custom], selects
the equalizer settings: [Low],
[Mid], [High].
Subwoofer:
(ATT, –10 - +10)
: 0 To adjust the volume level of the
subwoofer. (Available only when
[Subwoofer] is set to [ON].)
Balance:
(L 15 - 0 - R 15)
: 0 To adjust the sound balance
between left and right speakers.
Fader:
(Front 15 - 0 -
Rear 15)
: 0 To adjust the sound balance
between front and rear speakers.
HPF: 80 Hz,
100 Hz,
120 Hz, 140 Hz,
160 Hz, OFF (
)
To select the cut-off frequency of
the front/rear speakers.
LPF: OFF (
),
80 Hz, 100 Hz,
120 Hz, 140 Hz,
160 Hz
To select the cut-off frequency of
the subwoofer. (Available only
when [Subwoofer] is set to [ON].)
Option Purpose
OFF, ON (
)
To activate the demonstration.