Acer 5710 - Manual (Page 45)

Chapter 2 39
BIOS Setup Utility
The BIOS Setup Utility is a hardware configuration program built into your computer’s BIOS (Basic Input/
Output System).
Your computer is already properly configured and optimized, and you do not need to run this utility. However, if
you encounter configuration problems, you may need to run Setup. Please also refer to Chapter 4
Troubleshooting when problem arises.
To activate the BIOS Utility, press m during POST (when “Press to enter Setup” message is prompted
on the bottom of screen).
Press m to enter setup. The default parameter of F12 Boot Menu is set to “disabled”. If you want to change
boot device without entering BIOS Setup Utility, please set the parameter to “enabled”.
Press during POST to enter multi-boot menu. In this menu, user can change boot device without
entering BIOS SETUP Utility.
PhoenixBIOS Setup Utility
CPU Type : Intel(R) Core(TM) 2 CPU T5500
CPU Speed :
Serial Number :
Product Name :
Asset Tag Number :
Manufacturer Name :
UUID Number :
F1 Help Select Item F5/F6 Change Values F9 Setup Defaults
Esc Exit Select Menu Enter Select Sub-Menu F10 Save and Exit
IDE0 Model Name : HitachiHTS541616J9S-(PM)
IDE0 Serial Number : SB2451SJKA7H7E
1.66 GHz
Information Main Security Exit Boot
BIOS Version : V1.00
VGA BIOS Version : Intel V1471
XXXXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXXX
ATAPI Model Name : OptiarcDVDRWAD-75-(SM)
System Utilities
Chapter 2